3
USE
•
Unroll the power cord.
•
Check that the tension in force corresponds to that indicated on the apparatus.
•
Connect the apparatus in a socket-outlet,
•
Disconnect the power source cable before any operation of cleaning of maintenance and accessories assembly.
•
Stand the appliance on a table or flat surface.
•
The item must not be left unattended when it is connected to main supply.
•
The item is not to be used, if it has been dropped & if there are visible signs of damage or if it is leaking.
•
Never modify the appliance in anyway.
•
Do not use or keep this product outside when it is raining.
•
Certain parts of the appliance can get hot. Do not touch them, as you may burn yourself.
•
Place the bread slices in the slot (for the French bread, cut a loaf shorter than the slot, then cut it in two pieces
along its length.). Your appliance is provided to receive French bread, but also pieces of toast or other bread
slices if their thickness and their length are shorter than the slot.
•
Press down the bread carriage handle until it stops (in the same time, the grid inside the slot will tighten around
the bread in order to keep it away from the heating wires). Then release the pressure and the handle will stay
in the lower position, which means that the heating process has begun. If the handle comes up immediately,
check if the appliance is plugged in as it blocks when the unit is plugged in.
•
You can adjust the browning intensity to obtain a more or less toasted bread by positioning the browning control
selector to one of the degrees marked from 1 to 6. Therefore you only have to turn clockwise to increase the
intensity, and anticlockwise to decrease it. The higher the number is, the more toasted the bread will be.
To use the functions:
After pressing down the bread carriage handle, push on:
- The reheat button
which allows you to reheat bread or to toast bread.
- The defrost button
which allows you to
defrost
bread that has been frozen beforehand.
•
During the functioning, if you think that the bread is toasted enough or for another reason, you can break the
heating process, simply by pressing the cancel button “
CANCEL
”.
•
Always unplug the appliance after use and let it cool down before handling or storing it.
MAINTENANCE AND CLEANING
•
Before attempting any cleaning operation, make sure the toaster is unplugged from the supply socket and fully
cooled down.
•
To remove bread crumbs slide the crumb tray situated on the side of the appliance.
•
Never use sharp objects to clean. Doing so could damage the appliance.
•
To clean the exterior surfaces, simply wipe over with a soft damp cloth.
•
All other maintenance and repair should be performed by a qualified technician.
STORAGE
-
Ensure the unit is completely cool and dry.
-
Do not wrap the cord around the appliance, as this will cause damage.
-
Keep the appliance in a cool, dry place.
