Morris MVF-65374 Instruction Manual Download Page 2

2

DEAR CUSTOMER,

Your hob combines exceptional ease of use with excellent effectiveness. Once you have read 
the instructions, operating your hob will not be a problem.

Before being packed and leaving the factory, the safety and functions of this hob were ca-
refully tested.

We ask you to read the User Manual carefully before switching on the appliance. Following 
the directions in this manual will protect you from any misuse.

Keep this User Manual and store it near at hand.

The instructions should be followed carefully to avoid any unfortunate accidents.

Important!

The appliance may only be operated when you have read and understood this manual 
thoroughly.
The appliance is designed solely for cooking. Any other use (eg heating a room) is 
incompatible with the appliance’s intended purpose and can pose a risk to the user.
The  manufacturer  reserves  the  right  to  introduce  changes  which  do  not  affect  the 
operation of the appliance.

Certificate of compliance CE

The Manufacturer hereby declares that this product complies with the general requirements pursuant
 

to the 

following European Directives:

and therefore the product has been marked with the 

 

         

symbol and th

DECLARATION OF 

CONFORMITY 

has

 

been 

issued to the manufacturer and is available to the competent authorities 

regulating the market.

1. The Low Voltage Directive 

2014/35/EC

2. The Electromagnetic Compatibility Directive 

2014/30/EC

3. The ErP Directive 

2009/125/EC

Summary of Contents for MVF-65374


























Reviews: