19
2
0
MAINTENANCE
MAINTENANCE
drying time and energy consumption.
• Disconnect the power cord before cleaning!
• Do not operate the dryer without the filter!
• Clean the filter after each cycle to prevent fluff accumulation inside the dryer.
• The fluff accumulated on the filter will block the air circulation, which will increase
Note!
Clean the filter base
1. Open the cover.
2. Unlock three locking levers and take out the
filter handle.
3. Remove the filter base and clean it.
If there is too much fluff on the filter, clean it in
running water. Dry the filter thoroughly before
installing it back.
4. Clean the rubber sealings both at the filter and handle.
5. Re-insert the filter.
6. Lock three locking levers and make sure that the
levers are in right lock position.
7. Close the cover until there is a click sound.
As necessary, approx. once every 2 months, remove the fluff from the heat
exchanger using a vacuum cleaner with a dusting brush attached. Clean the heat
exchanger without applying any pressure. Otherwise the heat exchanger could
be damaged.
•
Clean heat exchanger
Warning!
！
Do not touch the heat exchanger with your hand,
which may result in cause an injury.
F
ilter Base
Clean Tumble dryer
Warning!
！
• Disconnect the power cord before cleaning!
• Clean the dryer with a wet cloth which is only damped
by clean water. Otherwise, the chemical cleaners may
damage the plastic surfaces and other parts.
• Please wear gloves when cleaning.
•
• Clean the door, especially the inside window.
• Clean the sealing around the front support.
• Clean the humidity sensor in side of the drum.
• Take out all the filters, clean the sealing and air tunnel.
Before starting the dryer, dry all parts with a soft cloth.
Prepare a wet cloth damped by clean water.
