Morris MHT-60038, User Manual

Page: 22 / 24

FAQS
The hood does not
work
Check that the hood is connected to power. Check that the fuses or automatic have
not jumped.
The hood still does
not work
If, after having checked the points mentioned above, your problem has not yet been
solved, contact the technical service or your distributor.
Problem Possible cause Solution
Excessive vibration. The appliance is not installed
properly on the brackets.
Take down the appliance and
check it is properly fixed.
The fan blade is damaged.
Switch off the appliance. Repair
to be carried out by qualified
service personnel only.
The fan motor is not fixed tightly.
The light is on, but the
fan does not work.
The fan blade is jammed.
The motor is damaged.
Both the light and
motor do not work. Light bulb blown. Contact Customer Services on.
Power connection
is faulty
. Check power supply.
Suction performance
reduced. Speed may be too low. Select a higher speed.
Aluminium filters
are dirty.
Clean the aluminium filters. (See
Care and maintenance section).
Top vent might be
obstructed.
Clear any obstruction.
Optional vent kit might be twisted. Ensure that the vent kit
is fitted according to the
manufacturer’s
instructions.
The installation may not comply
with the manufacturers
instructions. The vent hose should be correct
diameter throughout with no
reductions or restriction.(See
installation section).
Works normally but
cooking smells linger.
Carbon filter is not fitted in
recirculation mode or is full of grease. Fit carbon filter or replace the carbon
filter (See Care and maintenance
section).
EN