OPERATING INSTRUCTIONS:
1. Place the product in an upright position on a flat, steady, stable, heat-resistant surface. Make
sure there is nothing flammable or heat sensitive within 1 meter (40 inches). Operating the
product in any other position could cause a hazard.
2. Insert the plug into a suitable wall outlet after turning the thermostat knob counter-clockwise
to the minimum position and setting the power switch to “0” for off. The heater is suitable for
operation on an A.C. electricity supply having the same voltage as that show on its rating
label.
3. Turn the power switch from
“0” to either “LOW” (one light indicate), “MED” (two lights
indicate) or
“HIGH” (three lights indicate).
4. Turn the thermostat knob clockwise to
‘’HIGH’’ position. When the room temperature rises to
a comfortable level, slowly turn thermostat counter-clockwise until the indicator light just
goes out. To adjust the room temperature turn the thermostat clockwise to raise the
temperature, or counter-clockwise to lower it. Thus the heater will attempt to keep the room
temperature at the desired level.
5.
To turn off the heater, set the power switch to “0” position. The power indicator light turns off.
Unplug the product from the electrical outlet when it is left unattended or is not in use.
TIMER SETTING OPERATION:
•
24-hour timer.
•
Each segment is 15 minutes.
•
First, set the current time by rotating the Timer Dial clockwise until the arrow points to the
correct time.
•
Next, set the times at which you want the heater to turn ON, by pushing the relevant
sections outwards (towards the outside of the dial).
•
For all other times, when you want the heater to be off, make sure the corresponding
sections are pushed inwards (towards the centre of the dial).
PRECAUTIONS FOR USE AND MAINTENANCE
1. Always unplug the appliance and keep it away from any socket before cleaning.
2. To clean the outer surface of the appliance, use a lightly damp cloth. Then, dry it thoroughly
with a soft, dry cloth before using again.
3. Do not use any cleaning or chemical products of any kind. Do not let water enter the
openings on the heater. Do not use wax or products that create a shine as they can react to
heat and cause discoloration.
4. When the appliance is not being used for prolonged periods, ensure that it is fully unplugged
from the socket and store in its packaging for simple storage and later use.
Clean your radiator
as mentioned above and remove the wheels bases
