background image

INSTALLATION

Remove any water from the water tank before starting the unit. In order to save energy

 

 

do

not open windows or doors while the unit is running. Place the unit on a hard/

at surface.

On 

rst use run the unit continuously for 24hrs.

To reduce noise levels

Place a piece of carpet or a rubber mat under the unit to reduce any vibrations while the unit
is running.

MDB-16150HIW dehumidi

ers use compressor technology to extract water from the

environment.
The compressor dehumidi

ers are ideal for normal domestic or o

ce environments which 

o

are heated during the winter months with temperatures above 12-15

C.

MDB-16150HIW dehumidi

ers are easy to move around on castors and intelligent

dehumidi

ers which will extract unwanted humidity while saving money due to their 

humidistat and power saving logic. MDB-16150HIW dehumidi

ers feature an intelligent 

humidistat which is adjustable in increments of 5% from 40-80% RH insuring your room is 
not dried too much and power is not wasted.

Features

Your dehumidi

er belongs to the low energy premium dehumidi

ers featuring low power

consumption

 

 

power saving logic and advanced air puri

cation option.

1. Easy to use controls.
2.

 

Low energy only uses a fraction of the electricity of similar dehumidi

ers.

3. Great for up to 5 bed houses.
4. Cost e

ective way to combat mould

 condensation and damp.

5. Dries laundry more e

ciently than a tumble dryer.

6. Designed to complement any modern space.
7. Castors for improved mobility.
8. Intelligent CPU controlled digital humidistat with 35-80% RH and room humidity display.
9. Quiet vs turbo fan operation ensures the right balance between quiet operation and
maximum dehumidi

cation.

10. 24 hours start/stop timer.
11.

 

Tank operation or permanent drainage option with splash proof tank.

12.

 

Tank full alarm&auto-stop function.

5

Summary of Contents for MDB-16150HIW







































Reviews: