Morris DIM-12146, User Manual

Page: 21 / 23

“ ” & “ ”
indicators turn
on
simultaneously
The ice tray is not in
the right position. 1.Check if the ice tray is blocked by
something.
2.Unplug the appliance and plug it again,
then restart the appliance.
The ice collects
together. Making ice takes too
much time. Stop making ice and restart the ice-making
cycle after the ice melts.
The water in the water
reservoir is of too low
temperature. Fill the water reservoir with water ranges
between 8℃ and 25℃.
The ice-making
cycle seems
normal but no
ice is produced. The ambient
temperature or water
temperature is too
high. Start the ice-making cycle at a environment
with an ambient temperature less than 32°C
and fill the water reservoir with some cold
water.
Refrigerating system
leaks Call customer service
Refrigerating system
blocks Call customer service
Poor ice-making
result 1.Poor heat
dissipation.
2.The water
temperature is too
high.
3.The ambient
temperature is too
high. 1. Leave an 8-inch (20cm) clearance on all
sides of the ice maker for proper ventilation.
2.
Fill the water reservoir with water ranges
between 8℃ and 28℃
1.Operate the ice maker at a environment
with an ambient temperature between 10℃
and 32℃.