Morris CDR-12812, Instruction Manual, Page: 31 / 38

31
HOW TO CLEAN THE FILTER
1
100
2 3
2
3
Cleaning the water inlet filter
‡&OHDQWKHILOWHUZKHQZDWHUOHDNVIURPWKHZDWHULQOHW
Cleaning the drain filter (For Pump Model)
‡7KLVGUDLQILOWHULVXVHGWRVFUHHQWKHIRUHLJQVWXIIVVXFKDVWKUHDGVFRLQVSLQVEXWWRQVHWF
‡,IWKHGUDLQILOWHULVQRWFOHDQHGDWSURSHUWLPHHYHU\WLPHVRIXVHGUDLQSUREOHPFRXOGEH
caused.
CAUTION
%HFDUHIXOZKHQGUDLQLQJLIWKHZDWHULVKRW
1
Pull the power
plug out before
cleaning it.
2
Turn off the water
supply to the
washer and
separate the inlet
hose.
3
Pull the inlet filter
out.
4
Remove the dirt
from the inlet filter
with a brush.
1. Open the lower cover(
1
) by
using a coin. Remove the cap
hose(
2
) to pull out the hose.
2. Unplug the cap hose(
2
),
allowing the water to flow out. At
this time use a vessel to prevent
water flowing on to the floor.
When water does not flow any
more, turn the pump filter(
3
)
open to the left.
3. Remove any foreign material
from the pump filter(
3
). After
cleaning, turn the pump filter
clockwise and insert the cap
hose(
2
) to the original
place.
Close the lower cover.
+,: +,; +,? ࿱G૯൘༺G)51:QVLL !࿼ፎ"