Morris 57266, Instruction Manual, Page: 3 / 23

SAFETY INFORMATION
The open jaw digit electrical tester has been designed
according to IEC1010 – 1 and IEC1010 – 2 – 032
concerning safety requirements for electrical measuring
instruments and hand – held current clamps with an
overvoltage category (CAT III ) and pollution 2.
The open jaw digit electrical tester complies with the
requirements of the following European Community
Directives: 89/336/EEC ( Electromagnetic Compatibility )
and 73/23/EEC (Low Voltage) as amended by 93/68/EEC
(CE Marking).
However, electrical noise or intense electromagnetic
fields in the vicinity of the equipment may disturb the
measurement circuit. Measuring instruments will also
respond to unwanted signals that may be present within
the measurement circuit.
Users should exercise care and take appropriate
precautions to avoid misreadings.
-1-