9
edge range
combination bay kit 1
assembly guide
6
attach shelves
Lastly, screw in the shelves with self-tapping screws (not supplied - we
suggest ø4x30mm 18mm thick, and ø4x25mm 12mm thick).
4
attach to the wall
Screw the wall plates to the wall (screws and wall plugs not supplied) and
then fix the uprights and shelf supports to the wall plates with screws
M5x10 TB. Now tighten all screws and those of the joints.
2
insert the connectors
Insert end connectors (9652) and centre connectors (9651) in square
holes of uprights. End connector is a single model for right and left, pay
particular attention to direction of the thread.
1
place the base
Place the wooden bases (9625D/9626D) close to the wall, insert the
square collars (9615) and the uprights (9600/9601 with black finned cap)
3
insert wall plates and mark
Insert the wall plates (9612) in the uprights and shelf supports, place
against the wall, ensure they are level and mark references. The bases
remain detached from the wall to allow mounting with baseboards or
skirting. The wall plates on the shelf supports allow them to stay straight.
2
attach the hanging rails and shelf supports
Insert the 2 hanging rails (9653A/9653B) between the uprights. Insert
the 4 shelf supports (9655A) between the two bays. Fasten with screws
M5x10 TB -
not tight
.
