Morphy Richards VC70069 MUK Instructions Manual Download Page 1

PerformAir Profile bagged

cylinder vacuum cleaner

Please read and keep these instructions

VC70069 MUK Rev 1

To register for your 3 year guarantee, ring the Helpline numbers below

within 28 days of purchase

. This offer is only available in the UK.

Please have the following information available:
Serial number:                               Model number:                                
(see page 8 for guarantee details).

Getting the best from your new cleaner...

If your cleaner is not picking up as well as it should, please check

Dustbags

It is important to replace them, otherwise the performance of the cleaner
will be impaired.

Filters

It is important that the filters are cleaned regularly or replaced to allow air
through the appliance.

Blockages

Check the nozzle, tubes and hose for blockages.

Thermostat

Blockages, dirty filters or use with a full dust bag may cause the safety
thermostat to operate. Clear blockage, clean filters and replace bag.
Allow 60 minutes for the thermostat to self-reset.

If you have a problem or complaint, please call our dedicated UK based helpline

before returning your product to the retailer from where it was purchased.

UK Helpline:  0844 871 0949 
Replacement Parts:  0844 873 0715
Ireland Helpline:  1800 409 119

70069 rev1:VC70069 MUK Rev1  05/10/2009  09:55  Page 1

Summary of Contents for VC70069 MUK









Reviews: