7
3
Hold the base unit
(10)
firmly with both hands and
shake well.
4
Turn the base unit
(10)
upside-down and pull
back the boiler cap
(15)
. Unscrew the boiler
screw
(14)
with the boiler key
(13)
, which is
attached to the underside of the base unit. If the
screw is a bit too tight to undo, try using a large
screwdriver or a socket and wrench set for more
leverage.
5
Hold the base unit
(10)
over the sink, turn the unit
the correct way up to empty all water and loose
scale from the boiler into the sink.
6
Using clean water, refill and empty the boiler
repeatedly until all scale has been rinsed out.
7
Replace the boiler screw, ensuring it is tightened
fully. Replace the boiler cap, boiler key, water tank
and iron to the base unit.
WARNING: Ensure the boiler is empty before
replacing the boiler screw
(14)
.
8
The descaling indicator light
(19)
will extinguish
the next time you use the product. Please wait for
up to one minute whilst it pumps water and
registers that the boiler has been cleaned.
To clean a coated soleplate
Do not use scouring powder or solution as this
could cause damage to the coating.
If any man-made fibres fuse to the soleplate
(4)
,
set the iron at the MAX position and pass it over a
clean piece of cotton to draw the deposit off the
surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp
cloth and mild detergent, then wipe dry.
Allow the appliance to cool. Empty the water from
the water tank
(8)
by removing it from the base
unit
(10)
and opening the filling cap
(7)
. Once the
water tank is empty, re-attach it to the base unit.
If the steam generator is not going to be used for
a long time, also empty the boiler as instructed,
see ‘Cleaning the boiler’ on page 6.
To store, pull the cord clamp
(12)
outwards. Wrap
the power cord
(24)
and steam supply cord
(23)
around the base unit in the cord storage groove
(11)
.
Secure the cord in place with the cord clamp
(12)
.
Avoid kinking of cables, particularly at the exit from
the base unit.
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from. Please have the product name, model
number and serial number to hand when you call
to help us deal with your enquiry quicker.
UK Helpline:
0844 871 0960
IRE Helpline:
1800 409 119
Spares:
0844 873 0726
Talk To Us
If you have any questions or comments, or want
some great tips to help you get the most out of
your products, join us online:
Blog:
www.morphyrichards.co.uk/blog
Facebook:
www.facebook.com/morphyrichardsuk
Twitter:
@loveyourmorphy
Website:
www.morphyrichards.com
Emptying and storing
Contact us
RN42221MUK Rev4_IB 02/07/2013 15:22 Page 7
