5
1. Before first use, it is recommended to boil the kettle 2 or 3 times
following the instructions below, this will remove any dust or
residue remaining from the manufacturing process.
2. Remove the kettle from the power base before filling.
3. Wherever possible fill through the spout, as this helps to free the
filter from limescale build-up. The integrated water level indicator
allows you to easily see the amount of water in the kettle.
Always ensure that the level of water in the kettle is filled to at
least the minimum level shown on the water gauge.
4. Place the kettle on the power base, ensuring the kettle is
positioned on the 360° connector.
USING YOUR KETTLE
Other safety considerations
• The use of attachments or tools not recommended or sold by
Morphy Richards, may cause fire, electric shock or injury. The
kettle is only to be used with the base provided.
• Do not use the appliance for any use other than to boil water.
• Do not place the appliance on or near a hot gas or electric
burner or in a heated oven.
• The appliance must not be on the base unit when being filled
with water.
• Unplug from the outlet when not in use.
• WARNING: The appliance must not be immersed for cleaning.
• CAUTION: To prevent damage to the appliance, do not use
alkaline cleaning agents when cleaning. Use a soft cloth and
detergent.
Electrical requirements
• Check that the voltage on the rating plate of your appliance
corresponds with your house electricity supply which must be
A.C. (Alternating Current).
• WARNING: This appliance must be earthed.
• WARNING: This appliance is NOT to be used with extension
leads and/or power boards.
