Morphy Richards MOMENTO 47815, Important Safety Instructions Manual

Page: 24 / 33

F) WATER HARDNESS
The hardness of the tap water varies with each region and you should test the hardness of the water you are going to use in your
coffee-maker. Once the coffee-maker has been programmed with the hardness of the water, it will indicate when the lime scale
should be removed from the system.
First of all, test the water hardness. To do this, put the strip of reagent in the water for one second. Some of the squares on the strip
of reagent will change colour. The hardness of the water will be equal to the number of squares that change colour.
Sequence Press the button Message on screen
1. The coffee-maker is ready.
2. Press the ‘P’ button to enter the programming menu.
3. Press the ‘>’ icon until the ‘water hardness’ icon is displayed.
4. To programme the water hardness, press ‘P’.
5. After pressing ‘P’, the water hardness menu is displayed on the
screen.
Press ‘>’ to increase the water hardness level from 1 to 5 (after 5, it
returns to 1).
By default, the coffee-maker is programmed with a water hard-
ness level of 5.
6. To confirm your selection, press ‘P’.
To exit the programming mode, press ‘Esc’.
7. The coffee-maker is ready.
24
1 Soft (0)
2 Soft/hard (150)
3 Hard (120)
4 Hard/v.hard (250)
5 V.hard (425)
1 Soft (0)
2 Soft/hard (150)
3 Hard (120)
4 Hard/v.hard (250)
5 V.hard (425)
1 Soft (0)
2 Soft/hard (150)
3 Hard (120)
4 Hard/v.hard (250)
5 V.hard (425)
1 Soft (0)
2 Soft/hard (150)
3 Hard (120)
4 Hard/v.hard (250)
5 V.hard (425)
1 Soft (0)
2 Soft/hard (150)
3 Hard (120)
4 Hard/v.hard (250)
5 V.hard (425)