Morphy Richards meno Espresso, Instructions Manual

Page: 6 / 76

6
WARNING: Steam from the Steam Wand is extremely hot and can
scald.
IMPORTANT: Never wash your coffee machine accessories in a
dishwasher.
Descaling
1 Disconnect the appliance from the mains supply.
2 Make sure the appliance has completely cooled down completely.
3 Remove the Water Tank and Drip Tray from the machine.
4 Fill the water tank with dissolved citric acid solution, up to the
max level marked on the side of the tank.
5 Re-fit the Water Tank and Drip Tray to the
machine.
6 Place an empty container under the brewing head to gather the
descaled hot boiled water.
7 Connect the appliance to the mains supply.
8 Press the On/Off button and wait for the Coffee Ready Light to
illuminate.
9 Press the Coffee Dispense Button, water will flow through the unit.
10 Allow the pump to keep dispensing until the water tank is empty.
11
Repeat the process with cold water only to flush the system.
6
Troubleshooting
Problem Reason Solution
Water is dispensing from the Steam Wand Steam Control is open Rotate the Steam Control so
its closed
The Coffee temperature is too cold Heater block is not hot enough Before dispensing Coffee, make sure the
before dispensing ready light is illuminated.
The Coffee grinds are wet after use Coffee is not compact enough Tamp the coffee before inserting.
Espresso is weak Wrong Coffee Type Always use espresso coffee grinds
Milk is not frothing Air and steam are not getting into the milk Use a pin to clean the Steam Wand nozzle
and air holes in the cleaner
Coffee is too strong or weak Wrong volume of coffee Use the correct coffee filter:
1 person - 7g
2 person - 14g
What is E.S.E, and where can I find them? Easy Serving Espresso, They are available online and in some coffee
coffee within a teabag supermarkets
47580MEE Rev1_9225 47507 MEE pump - Jon 27/04/2011 15:00 Page 6