99
99
UUKK HHeellpplliinnee 00887700 006600 22661144 RReeppllaacceem
meenntt PPaarrttss 00887700 115577 66664455 IIrreellaanndd HHeellpplliinnee 11880000 440099111199
4
Depress the steam button
⁄
⁄
for 1
minute to clear the system of air
(first time use only) which will be
accompanied by a clicking noise
which is quite normal.
5
Begin first time ironing with an old
towel. Note: If you press the steam
button before the steam generator
reaches its required temperature a
warning double bleep will sound.
6
The appliance is ready to use.
7
Press the steam button
⁄
⁄
for
steam ironing.
8
Depress the power switch
Á
Á
to
turn off the base unit when ironing is
complete.
MODELS WITH
SPRAY FEATURE
Certain models are fitted with a
spray feature. Stubborn creases and
excessively dry clothing can be
softened by damping the material
with water. This procedure means
ironing can be achieved without
applying excessive pressure.
Filling
C
C
To fill the tank with water, press the
release button
Ô
Ô
and lift away the
spray unit
Ì
Ì
.
Pull the tank
away from the
spray unit in a downward direction,
taking care not to damage the tank,
and fill water to the ‘Full’ mark.
Re-assembly
C
C
Attach the tank to the spray unit
taking care to align the parts
correctly.
Locate the spray unit to the front of
the iron and press home until the
unit locks into place.
Press the pump
Ó
Ó
a few times to
purge the air from the system, when
a fine mist of water is created, the
unit is ready for use.
Dry ironing
1
Connect the appliance to a suitable
mains outlet.
2
42288 Only:
Press the steam switch
Î
Î
2 times until all three steam level
indicator lights go off (steam off
mode).
3
Turn the temperature dial
›
›
on the
iron in a clockwise direction, select
dot-1, dot-2, or dot-3 according to
the recommendation of the garment
label.
4
The temperature indicator light
¤
¤
glows on the iron indicating that it is
switched on.
5
When the required temperature is
reached, the temperature indicator
light on the iron goes off. The iron is
ready to use.
It is always a good idea to begin
with ‘cool’ fabrics and work up to
higher settings.
An iron heats up quicker than it
cools down so you’ll save time and
electricity.
Auto-shut off (42288
only)
An auto-shut off system will activate
if the steam is not used for over 15
minutes. The mains indicator light
Á
Á
will flash between green and red
indicating the unit is in ‘sleep mode’.
When this occurs, press the steam
select button
Î
Î
or the power
switch
Á
Á
‘ON’ once. The appliance
will switch on immediately and you
need to check, and select, the
required setting.
ANTI-SCALE SYSTEM
The anti-scale cartridge is designed
to reduce the build-up of limescale
which occurs during steam ironing,
this will prolong the working life of
your iron. However, please note that
the anti-scale cartridge will not
completely stop the natural process
of limescale build-up.
When the cartridge needs replacing
the indicator light
Â
Â
will flash.
NOTE: The unit will not switch off,
but you need to replace the
cartridge as soon as possible.
CALC
CALC
C
C
Ó
Ô
Ì
42288 rev2 29/8/07 14:56 Page 9
