background image

• The use of attachments or tools not

recommended or sold by Morphy
Richards may cause fire, electric shock
or injury.

• Do not attempt to connect any other

appliance to the base unit or this
appliance to another base unit.

• Do not tamper with the connector in any

way.

• Do not use the kettle for any use other

than to boil water.

• Do not use outdoors.
• Do not place the kettle on or near a hot

gas or electric burner or in a heated
oven.

• The kettle must not be on the base unit

when being filled with water.

• The mains lead of the cordless base

cannot be repaired. If the mains lead is
damaged, the cordless base should be
discarded and replaced.

• Unplug from the outlet when not in use.

Electrical requirements

Check that the voltage on the rating

plate of your appliance corresponds with
your house electricity supply which must be
A.C. (Alternating current).

For appliances with fitted plug.

If the socket outlets in your home are not
suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.

IMPORTANT : THE PLUG REMOVED

FROM THE MAINS LEAD, IF SEVERED,
MUST BE DESTROYED AS A PLUG WITH
A BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A LIVE
SOCKET OUTLET.

Should the fuse in the 13 amp plug

require changing a 13 amp BS1362 fuse
must be fitted.

WARNING: THIS APPLIANCE MUST

BE EARTHED.

Features

⁄ 

Lid knob

¤ 

Lid

‹ 

Spout filter

› 

Concealed element

360˚connector

fl 

Cordless base unit

‡ 

Cord storage

· 

On off switch

‚ 

Power on neon 

„ 

Water level indicator

¤

·

3

Filtermaster III Rev 2  14/8/03  4:56 pm  Page 4

Summary of Contents for IBFILTER3







Reviews: