background image

Morphy Richards products are intended for household use only.

Morphy Richards has a policy of continuous improvement in product quality and design.

The Company, therefore, reserves the right to change the specification of its models at any time.

Morphy Richards Limited, Mexborough,
South Yorkshire, England, S64  8AJ

444/8402/42 Rev 2

Additional  points

Additional  points

Additional  points

Additional  points

Additional  points

In order to achieve uniform browning, we
recommend you wait a minimum of 30
seconds between each toasting, so that the
control can automatically be reset.

If toasting one slice only, you may need to
adjust the browning control to a slightly
lower setting.

Stale bread toasts more rapidly than fresh
bread. Therefore, the browning control
should be set at a lower setting than usual.

All sorts of bread can be used as well as
teacakes, small rolls etc. Slices should not
however be so thick as to cause burning or
jamming within the bread slots.

When toasting 2 slices or more it is
recommended they are of equal size and
freshness.

Allow the toaster to cool fully before putting
away.

Cleaning  and  Maintenance

Cleaning  and  Maintenance

Cleaning  and  Maintenance

Cleaning  and  Maintenance

Cleaning  and  Maintenance

After use and before cleaning, switch off

at the mains, remove the plug from the wall
socket and wait for the toaster to cool.

Wipe the outside of the toaster with a damp

cloth only and dry with another cloth or
tissue.

NEVER use metal polish or coarse scouring
agents and never immerse your toaster in
any sort of liquid.

NEVER use any pointed or sharp articles
for cleaning the inside, otherwise the
heating element will be damaged.

NEVER use a brush or push your fingers or
metal objects down the slots.

Crumb  tray

Crumb  tray

Crumb  tray

Crumb  tray

Crumb  tray

Crumbs will accumulate in the crumb tray

and could catch fire if not emptied periodically.
When the toaster has cooled down completely,
tap the sides of the case lightly to dislodge any
crumbs lodged in the toasting chamber and pull
out the crumb tray 

. Empty the tray and

replace it.

Never operate the
toaster without
the crumb tray
fitted.

Warming  rack 

Warming  rack 

Warming  rack 

Warming  rack 

Warming  rack 

Rotate the warming rack knob to raise the

bun carrier. Place the buns or other items onto
the carrier. Set the browning control knob to
between 1 and 3. Depress the bread carriage
lever until it holds down. Wait for the toaster to
switch off
automatically or
press the Cancel
button to switch the
toaster off before
removing the buns.
Take care, not to
touch the metal of
the bun carrier that
will be hot.

Summary of Contents for IBEUROPAT

Page 1: ...original till receipt or invoice to indicate the date of initial purchase To qualify for the 2 year guarantee the appliance must have been used according to the manufacturers instructions For example the crumb tray should be emptied regularly as recommended by the instructions EXCLUSIONS Morphy Richards shall not be liable to replace or repair the goods under the terms of the Guarantee where 1 The...

Page 2: ...ith it placed on a heat resistant surface 15Leave sufficient space all around the toaster to allow the hot air to escape Take special care to keep the toaster away from flammable materials such as curtains or draperies during and after use Do not use underneath cupboards 16Never cover the toaster 17Do not put any food other than bread into the toaster 18Do not use oversize bread or bread that expa...

Page 3: ...loaded eg only one slice then the browning control should be set to a slightly lower setting 3 Do not re toast bread on a high setting If you wish to make the toast slightly darker re toast use a low setting or use the re heat function 4 If you wish to stop the toasting cycle at any time press the Cancel button Cancel setting Cancel setting Cancel setting Cancel setting Cancel setting The cancel b...

Page 4: ...nce Cleaning and Maintenance 1 After use and before cleaning switch off at the mains remove the plug from the wall socket and wait for the toaster to cool 2 Wipe the outside of the toaster with a damp cloth only and dry with another cloth or tissue NEVER use metal polish or coarse scouring agents and never immerse your toaster in any sort of liquid NEVER use any pointed or sharp articles for clean...

Reviews: