If you need any further advice, please call our Technical
Helpline on 08450 777700 (Mon-Fri)
9
Setting the Alarm to Wake to CD
1.
Press the CD OPEN button (16) to raise the lid and place a CD into the
compartment. Ensure the CD is pressed firmly into position then close the lid
correctly.
2.
Set the required alarm time by pressing and holding the ALARM button (11) and
simultaneously hold down the SEARCH SET button (8) to fast forward or the
SKIP SET button (7) to reverse.
3.
Switch the function switch (18) to CD.
4.
Slide the ALARM switch (2) to the AUTO position. (ALARM indicator (23)
will illuminate).
5.
Using the PTS (Programmable CD Alarm Track System) below you may set the
CD track of your choice.
At the wake up time, the CD will play until the end of the disc unless the REPEAT
function is activated, then it will play continuously for approximately 2 hours.
6.
Press the STOP button (5) or the power OFF button (13) if you wish to stop the
CD playing at any time.
If you fail to insert a CD into the CD player the alarm will automatically default to the
buzzer alarm.
PTS (Programmable CD Alarm Track System)
The unit may be set to play any preselected CD track of your choice.
1.
Press and hold the PTS button (9) and simultaneously hold down the SEARCH
SET button (8) to select the track number. This display will indicate the selected
track.
2.
Press and hold the PTS button (9) and simultaneously hold down the
SKIP SET button (7) will adjust the tracks in the reverse direction.