6
4
Using the handle, pull the filter assembly
from the top of the dust pod.
L
5
Empty the dust pod and put safely to one
side.
6
Remove outer filter, using lever action as
opposed to straight pull, empty out any
dust.
M
7
Refit outer filter by pushing gently onto three
lugs.
8
Re-fit filter assembly into dust pod. Locate
rear of the filter assembly first.
Note: All parts of the dust pod and dust pod
filter assembly are washable. Use warm water.
Do not use detergent.
IMPORTANT: All parts must be fully dry
before re-fitting.
Replacing dust
container
1
Insert the hook at the bottom rear of the
dust pod into the tray on the body.
O
.
2
Push the dust pod towards the cleaner body
until it clicks into place.
Exhaust filter
After approximately 5 emptyings of the dust
container the exhaust filter should be cleaned.
1
Unclip the exhaust filter cover
È
by lifting
the bottom tab.
P
2
Remove foam filter.
3
Shake the filter vigorously to remove any
build up of dust.
4
Refit exhaust filter cover by inserting top two
pegs then clip in the bottom tab.
Depending on usage, the exhaust filter
should be replaced approximately every 6
months.
P
O
M
N
L
73091 Rev 3 15/6/05 9:18 AM Page 6
