Textiles and clothes are supposed
to carry ironing instructions. If they
don’t you should follow the fabric
guide on page 4, but be sure to test
the temperature by ironing the hem of
the garment or similar area first.
If you turn the control dial down
from a hot setting to a cooler setting,
wait until the iron temperature has
stabilised before you continue ironing.
Filling
Filling
Filling
Filling
Filling
1
Before filling the iron with water,
ensure that the iron is unplugged
and the steam control
is set to
.
2
Pull the water inlet cover
out
and pour the water through the
filling hole into the water tank
,
using the beaker provided
. In
hard water areas the use of
distilled or demineralised water is
recommended.
3
Replace the water inlet cover
before using the iron.
Never use battery topping-up
fluid or water containing any
substances like starch or
sugar, or defrosted water from
a refrigerator.
Temperature control dial
Temperature indicator light
Sole plate
Water tank
Water inlet cover
Steam control
Dial pointer
Before use
Before use
Before use
Before use
Before use
It is recommended that you use up
one beaker of water by operating
your iron’s steam and shot of steam
functions before ironing any clothes
as some dripping may occur while
your iron’s steam system is first
activated.
Note : The steam facility should
only be used on garments which are
suitable for ironing at the 3 dot setting.
5
Components of your iron
Components of your iron
Components of your iron
Components of your iron
Components of your iron
Electrical requirements
Electrical requirements
Electrical requirements
Electrical requirements
Electrical requirements
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be A.C.
(Alternating current).
If the socket outlets in your home
are not suitable for the plug supplied
with this appliance the plug should be
removed and the appropriate one
fitted.
IMP0RTANT : THE PLUG
REMOVED FROM THE MAINS
LEAD, IF SEVERED, MUST BE
DESTROYED AS A PLUG WITH A
BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A
LIVE SOCKET OUTLET.
Should the fuse in the 13 amp
plug require replacement, a 13 amp
BS1362 fuse must be fitted.
WARNING : THIS APPLIANCE
MUST BE EARTHED.
Temperature guide
Heat setting markings on the adjustable control dial of all Morphy Richards
irons match those of the international Textile Care Labelling Code.
Instructions for use
Instructions for use
Instructions for use
Instructions for use
Instructions for use
Symbol
Control
knob
positions
Fabric
Ironing
With water in tank
Without water
in tank
(120
o
C Max) Cool (160
o
C Max) Warm
(210
o
C Max) Hot
Do not
iron at all
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, polyester
mixtures e.g.
Polyester/Cotton
Cotton, linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Iron on wrong side.
If moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this setting
usually require steam
pressing for heavy cotton,
denim etc
Dry
Steam
/shot of steam
Dry ironing
4
