background image

2

Important safety

instructions

The use of any electrical appliance

requires the following common sense safety
rules.

Primarily there is danger of injury or

death and secondly the danger of damage
to the appliance. These are indicated in the
text by the following two conventions:

WARNING: Danger to the person!

IMPORTANT: Damage to the appliance! In
addition we offer the following safety
advice.

Location

• Do not use outdoors.

Children

• Close supervision is necessary when any

appliance is used near children.

Personal safety

• WARNING: Burns can occur from

touching hot metal parts, hot water
or steam. Use caution when you
turn a steam iron upside down,
there may be hot water in the water
tank.

• WARNING: To protect against the

risk of electric shock do not put the
appliance in water or in any other
liquid.

• Do not use the vertical steam feature on

clothes that are being worn.

• Do not leave the iron unattended whilst

plugged in or on an ironing board. Never
allow the mains lead to over hang the
work surface.

• The socket should always be off before

plugging or unplugging from the socket.
Never yank the cord to disconnect from
the socket, instead, grasp plug and pull
to disconnect.

• Do not allow the cord to touch hot

surfaces. Let the iron cool completely
before putting away. Loop cord loosely
around the iron before storing.

Other safety considerations

• Use the iron only for its intended use.
• Always disconnect the iron from the

electrical socket when filling with water
or emptying, and when not in use.

• Do not operate the iron with a damaged

cord or if the iron has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble the iron, but
telephone Morphy Richards for advice.
Incorrect reassembly can cause a risk of
electric shock when the iron is used.

Special instructions

• If your iron does not work, check the

following points:

Has the temperature control been set to

the required temperature? Is the plug in
its socket? Is the plug itself or the
socket faulty? (Check by plugging in
another appliance).

• WARNING: When not in use, your

iron should never be placed flat and
left on an ironing board.

• To prevent damage to the textile being

ironed, follow the temperature guide
carefully. (Test the inside of the hem of
the garment).

• When ironing is complete, remove the

plug from the socket, empty any
remaining water from the tank, and allow
to cool before storage.

• If you drop or severely knock your iron

this could cause internal damage even if
the outside appears alright. Have it
checked by a qualified electrician.

• It is recommended that you use up one

beaker of water by operating your iron’s
steam and shot of steam functions
before ironing any clothes as some
dripping may occur while your irons
steam system is activated.

40622 Rev 1  31/5/05  9:01 AM  Page 2

Summary of Contents for IB40622









Reviews: