5
Position of stopper
A rubber stopper is fitted to your mobile
straightener to protect the product during
transit.
•
Position A
shows the
position to use during
charging.
•
Position B
shows the
position to use during
transit and when
charged.
Adaptor
Use only the adaptor supplied with the
product.
The charging adaptor will get hot during
use, this is quite normal
Charging by mains power
1
When you first take this product out of
the packaging, it will require charging
from the mains, initially for
8 hours.
Charging for longer periods will not
provide any more power and should
be avoided.
2
Plug the adaptor into the straightener,
whilst switched off and in a closed
position, plug the transformer into the
mains socket and switch the socket on.
3
When the batteries are charged the unit
can be used whilst plugged into the
mains to extend the times of usage, if so
required.
4
Heat up times will vary if the batteries
are flat to start with.
5
After first use it will only take
4 hours
to re-charge. This should provide
approximately 30 minutes of continuous
use.
6
A new batterys full performance is
achieved only after two or three
complete charge and discharge cycles.
IMPORTANT : After charging your
straightener ensure the rubber
stopper is in position B, covering the
charging connection.