background image

2

In addition, we offer the following safety advice.

Location

Do not use outdoors or in a bathroom.

Always locate your appliance away from the edge of the
worktop.

Mains cable

Do not let the mains cable hang over the edge of the
worktop where a child could reach it.

Do not let the lead run across an open space e.g. 
between a low socket and a table.

Do not let the cable run across a cooker or other hot area
which might damage the cable.

The mains cable should reach from the socket to the
base unit without straining the connections.

The power cord cannot be replaced. Contact Morphy
Richards for advice.

Other safety considerations

Do not use the appliance for anything other than its 
intended purpose.

WARNING: Misuse of appliance could 
cause personal injury.

The use of attachments or tools not recommended or
sold by Morphy Richards may cause fire, electric shock
or injury.

Product specific safety

Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions or has been
damaged in any manner.

Electrical requirements

Check that the voltage on the rating plate of your 
appliance corresponds with your house electricity supply
which must be A.C. (Alternating Current).
Should the fuse in the mains plug require changing, 
a 3 amp BS1362 fuse must be fitted.

The use of any electrical appliance requires the following common sense safety rules. 

Please read these instructions carefully before using the product. 

This appliance can be used by persons with reduced physical,

sensory or mental capabilities, or lack of experience and
knowledge, if they have been given supervision or instruction
concerning the use of the appliance in a safe way and understand
the hazards involved.

Children shall not play with the appliance.

This appliance shall not be used by children.

Keep appliance and cord out of the reach of children. 

Do not use your Food Processor continuously for longer than 
3 minutes when the blender jug is fitted. After using for these
lengths of time, allow to cool for 10 minutes. For other times refer
to pages 7-9.

Avoid touching moving parts. Keep hands, hair and clothing, and
utensils away from the hand mixer attachments during operation,
to prevent personal injury and/or damage to the appliance.

Switch off the appliance and disconnect from the supply before
changing accessories or approaching parts that move in use.  

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.

Unplug from the outlet when not in use, or when left unattended,
and before assembling, disassembling or cleaning.

For care and cleaning refer to page 5-9. 

Health And Safety 

FP401011 MUK REV 1.qxp_Layout 1  10/08/2016  11:40  Page 2

Summary of Contents for FP401011













Reviews: