Filter rapide kettle
Please read and keep these instructions
www.morphyrichards.com
getting the best from your
new kettle...
• Empty the water out of the kettle after first
boiling
To clean away any deposits that are left in the kettle after the
manufacturing process.
• Filling your filter kettle
When filling your filter kettle the water must cover the element.
The minimum is 1 cup or 300mls.
Do not overfill past the maximum mark as the filtration
will be impaired.
• Safety first
Always pour water slowly and carefully to prevent the splashing of
scalding water.
• Cartridge
PLEASE NOTE: It is quite normal to see black particles in the
bottom of the cartridge pack and in the top compartment when in
use. Please be assured that these particles are not harmful to you
or your filter jug and you should not be concerned if you see any.
43545 Rev 1 21/3/05 2:57 PM Page 3