background image

6

HOW TO USE

1

Ensure the blanket is fitted to
the bed correctly, see diagram

A

.

2

Plug the power lead into the
closest socket, using an
extension lead, if needed, to
ensure that the lead is not
stretched.

Preheating the bed

Move the heat setting on the
control switch to heat level 3 or
4, depending on the level of the
heat required. Allow
approximately 60-90 minutes for
the blanket to heat the bed
thoroughly, although this time
may vary depending on the
room temperature and type of
bedding used.

In cold weather, all electric
blankets will take longer to heat
the bed to a comfortable
temperature. Please allow for
this.

All night use

NOTE: Blankets are perfectly
safe to be used all night.
However, we recommend using
the heat setting below.

Move the heat setting on the
control switch to heat level 1 or
2.

These settings will provide safe
and comfortable heat to sleep
on all night.

These settings can be used to
air the bed.

WARNING: Always ensure
that the heat setting is
moved to the OFF position
when you get up the next
day, or after airing the bed.

WASHING 
INSTRUCTIONS

WARNING:

Do NOT dry clean - 

Do NOT iron - 

WARNING: Before washing or
drying, ensure that you
detach all the controls from
the blanket.

Measure the blanket so it can
be stretched back to its original
size whilst wet.

NOTE: Please ensure the
blanket is fully dry before use.

1

Unplug the blanket from the
power socket.

2

Disconnect the control switch
and cord from the blanket by
lifting the locking lever over the
raised button and pulling apart

B

.

Machine washing

Only use a washing machine
with a drum large enough to
take the blanket without forcing
it in.

Wash on the wool setting at
40°C.

Hand washing

1

Use a mild washing liquid or
detergent and lukewarm water.

2

Immerse the blanket in the
water and allow to soak for 5-10
minutes.

3

Squeeze the soapy water
through the fabric.

4

Rinse the blanket thoroughly in
cool water, gently squeezing the
fabric.

WARNING: Do not wring

6

B

UK Helpline

0844 871 0960       

Ireland Helpline

1800 409 119

EB75283 MUK Rev 1_Instruction Booklet  17/12/2010  09:47  Page 6

Summary of Contents for EB75283MUK









Reviews: