7
www.morphyrichards.com
Trouble shooting
Check the plug is in its socket
and the switch is in the ‘on’
position.
Is the plug itself or the socket
faulty? Check this by plugging
in another appliance.
•
Appliance gets very hot.
Blender has been used
continuously for too long.
Leave the appliance to cool.
•
Appliance not working.
The removable attachments
have not been fitted correctly.
Detach the attachment and
replace as described in
‘Assembling the attachment’.
Wall mounting
bracket
The hand blender can be wall
mounted for convenient storage
H
.
WARNING: Always ensure
you are not drilling into the
wall adjacent to any
electrical wires or pipes
such as water or gas.
Do not mount the storage
bracket/unit over or near any
portion of a heating or cooking
appliance or sink or basin.
1
Find a suitable position on the
wall or cupboard where the
blender is to be positioned.
2
Mark the fixing points through
the bracket.
3
If you are fixing to a solid brick
or block wall use a 6mm
masonry drill and drill to a
depth of 25mm.
4
If fixing to a wood or cupboard
surface, drill a 2mm pilot hole
or use a bradawl.
DEDICATED
HELPLINE
If you have any difficulty with
your appliance, do not hesitate
to call. We are more likely to be
able to help than the store from
where you bought it.
Please have the following
information ready to enable our
staff to deal with your enquiry
quickly:
•
Name of the product
•
Model number as shown on the
underside of the appliance or
rating plate
•
Serial number
UK Helpline
0870 060 2609
Replacement Parts
0870 167 6640
Ireland Helpline
1800 409119
H
Cleaning
Before cleaning and
maintenance, switch the
appliance off and unplug it.
WARNING: Handle the
blades with care as they are
sharp.
1
The whisk gearbox and
chopping bowl lid should be
wiped over with a warm soapy
cloth. Do not immerse these
parts in water.
2
Clean the main housing with a
damp cloth and dry all the parts
thoroughly.
WARNING: Never immerse
main housing in water or
any other liquid.
48952 Rev1 23/5/06 11:27 Page 7
