6
www.morphyrichards.com
To clean a coated
soleplate
(certain models only)
In the unlikely event of any man-
made fibre fusing to the soleplate,
set the iron at the 3 dot position and
pass it over a clean piece of cotton
which will draw the deposit off the
surface.
Do not use scouring powder or
solution as this could cause damage
to the coating.
To clean an aluminium
soleplate
To keep the soleplate clean and free
of limescale, make a paste of mild
scouring powder and a little water.
Apply a small amount to the
soleplate, rub and then remove with
a damp cloth. Wipe thoroughly with
a clean cloth.
Exterior
Allow the iron to cool and wipe over
with a damp cloth and mild
detergent, then wipe with a dry cloth.
If your iron doesn't work
If the iron does not work, check the
following:
•
Has the temperature control been
set to the required temperature?
•
Is the plug in its socket?
•
Is the plug itself or the socket
faulty? Check by plugging in
another appliance.
40655MCZ Turbosteam 17/11/06 9:50 am Page 6
