Other safety considerations
•
Do not leave appliance unattended whilst in use.
•
Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions or has been damaged in
any manner. Contact Morphy Richards for advice.
•
The use of attachments or tools not recommended or sold
by Morphy Richards, may cause fire, electric shock or
injury.
•
Do not attempt to connect any other appliance to the base
unit or this appliance to another base unit.
•
Do not tamper with the connector in any way.
•
Do not use the appliance for any use other than to boil
water.
•
Do not place the appliance on or near a hot gas or electric
burner or in a heated oven.
•
The appliance must not be on the base unit when being
filled with water.
•
Unplug from the outlet when not in use.
•
Do not move while the kettle is switched on.
•
To prevent damage to the appliance do not use alkaline
cleaning agents when cleaning, use a soft cloth and a mild
detergent.
ELECTRICAL REQUIREMENTS
Check that the voltage on the rating plate of your appliance
corresponds with your house electricity supply which must
be A.C. (Alternating Current).
WARNING: The appliance must not be immersed for
cleaning.
WARNING: This appliance must be earthed.
UK only
Where used, should the fuse in the 13 amp plug require
changing, a 13 amp BS1362 fuse must be fitted.
Features
⁄
Lid with finger pad/ lid release buttons
(depending on model)
¤
Spout filter
‹
Concealed element
›
360° connector (concealed)
fi
Cordless base unit
(varies between models)
fl
Cord storage
‡
On/off switch
·
Water level indicator x 2 with illuminating light
‚
Lid release button
(certain models only)
„
Whistle on/off switch
(certain models only)
BEFORE FIRST USE
Before using the appliance for the first time, fill with water,
boil and pour away.
Operating the appliance
1
Wherever possible fill through the spout, as this helps to
free the filter from limescale build-up.
•
The integrated water level indicators allow you to easily see
the amount of water in the kettle.
•
Always ensure that the appliance is filled until the water is
visible through the level indicator.
•
Boil only as much water as you need as this saves
electricity.
2
Place the appliance on the base unit, ensuring the appliance
locates on to the 360° connector.
•
The 360° connector allows the appliance to be located at
any position - ideal for left and right handed users and
convenient positioning on worktop.
3
Plug in and switch on at the wall socket.
4
Switch the appliance on. The water level indicator will light
up.
5
When the water boils the appliance will switch off
automatically.
•
Depending on the model varient you have purchased, the
kettle illumination will turn off and/or whistle to indicate it
has boiled.
•
If you are using the appliance for the first time, pour away
the boiled water and refill.
6
Lift the appliance from the base unit by the handle ensuring
you hold the appliance level.
•
To re-boil, switch to ON again. If the appliance has just
switched off wait a minute or so before switching it back
on again.
•
If you do not put in enough water, or switch on the
appliance when it is empty, the safety cut-out will switch off
the power automatically. If this happens, refill and wait a
few minutes for the element to cool, then use as normal.
Filter removal
1
Open the lid.
2
Lift the filter upwards from its location using the tab
provided.
3
To refit the filter, slot it into the side wall guides and press
down firmly. Ensure the filter is correctly located into the
central guide.
WARNING: Make sure that the filter is put in correctly
otherwise the lid will not close.
Whistle feature
A
(certain models only)
•
There is a switch
„
on the cordless base of the product
that can switch the whistle on and off as desired.
4
43681MCZ Rev2:9225 47507 MEE pump - Jon 16/4/09 17:12 Page 4
