7
Customising the Pre-set Brew Programs
If you do not wish to use the pre-set brew programs which dispense either 40ml (Espresso) or
110ml (Lungo) of coffee, then you can adjust the pre-set brew programs to dispense your desired
quantity of coffee. To do this, follow the steps below.
Follow steps 1-5 in section 2, “Everyday Use of the Machine”.
2
If you wish to adjust the pre-set brew
program of the Lungo function, press and
hold the Lungo Button
(9)
and follow step 1.
If you wish to adjust the pre-set brew program
of the Espresso function, press and hold the
Espresso Button
(8)
until the desired quantity
of coffee is dispensed into your cup, then
release the button. During this process the
machine will beep once.
Once you release the button, the machine will
store this program to memory. In future use,
whenever the Espresso Button
(8)
is pressed,
your machine will automatically run the brew
program that you have previously adjusted, not
the factory pre-set program.
1
If you do not wish to use the programs that you
have previously set yourself, and would like to
restore your machine back to the pre-set
programs, follow the steps below:
•
Unplug the machine.
•
Ensure that the Slider
(5)
on top of the machine is
completely closed, and does NOT contain a
coffee capsule.
•
Press and hold the Lungo Button
(9)
, plug the
machine in and switch the power on at the
socket.
•
Continue to press and hold the Lungo Button
(9)
for 15 seconds until the machine beeps once.
After the beep, your coffee machine will be
restored to factory settings.
Restoring Your Machine
to Factory Settings
CM179000MUK REV2.qxp_Layout 1 09/03/2017 11:06 Page 7
