5
For details of other Morphy Richards products, please see our website:
5
Select the tea strength by
pressing the strength selector
button
·
. Press the button
repeatedly to rotate through
the strength options. Each
LED light corresponds to a
brewing time which
determines how strong your
tea will be.
6
Select the water temperature
by pressing the Temperature
Button to scroll through the
options
‚
. The desired
temperature will illuminate on
the Control Panel when
selected. The Tea Maker has
3 temperature settings 85º,
95º and 100º. The default
temperature is 85º. Use the
Tea Temperature chart below
as a guide.
7
To begin the brewing process
press the Start Button
Ê
.
The button will illuminate.
8
The Digital Display will show
the temperature of the water
as the heat rises to the
required temperature.
•
The Tea Maker will then brew
your tea to the strength that
you have selected. A
countdown timer will begin
on the display, finishing at
0:00. When complete the Tea
Maker will beep 5 times.
Keep Warm
•
The Tea Maker will only keep
warm until the jug is removed
from the base, for a
maximum of 20 minutes after
brewing.
•
The keep warm setting will
switch off as soon as the jug
is removed from the base.
Stand By
•
The Tea Maker will go into
standby mode if not used
within 20 minutes of
switching on at the mains. In
order to activate press any
button.
Descaling
IMPORTANT: As this
appliance is fitted with a
concealed element it must be
descaled regularly. The
frequency of descaling
depends on usage and the
hardness of the water in your
area.
Excessive scale can cause
the appliance to switch off
before boiling or reaching
temperature and may
damage the element
invalidating the warranty.
It is essential that regular
descaling takes place.
Remove hard scale using a
proprietary descaling product
suitable for stainless steel,
glass or plastic.
Alternatively use citric acid
crystals (available from most
pharmacies) as follows:
1
Fill the appliance 3/4 full, boil,
then remove the Tea Maker
from the base unit and stand
it in an empty sink or bowl.
2
Gradually add 50gm of citric
acid crystals to the water,
then leave the Tea Maker to
stand. Do not use a more
concentrated solution.
3
As soon as the effervescence
subsides, empty the
appliance and rinse it
thoroughly with cold water.
4
Wipe the outside of the
appliance thoroughly with a
damp cloth to remove all
traces of acid which may
damage the finish.
IMPORTANT: Ensure that the
electrical connections are
completely dry before using
the appliance.
5
Fill the Tea Maker with water
and run a brewing cycle with
an empty Tea Hopper.
Discard the water after the
brewing process has
completed.
Tea
Temperature Tea per person Tea
Temperature Tea per person
Apple
95
o
1.5 tsp
Herbal
95
o
1 tsp
Black Tea
100
o
1 tsp
Indian Chai
100
o
1 tsp
Blackcurrant
95
o
1.5 tsp
Jasmine
85
o
1 tsp
Ceylon
100
o
1 tsp
Lapsang Souchong
100
o
1 tsp
China Rose
100
o
1 tsp
Lemon
95
o
1.5 tsp
Cranberry
95
o
1.5 tsp
Mango
95
o
1.5 tsp
Darjeeling
100
o
1 tsp
Oolong (Blue) Tea
85
o
1 tsp
Earl Grey
100
o
1 tsp
Orange Pekoe
100
o
1 tsp
Elderflower
95
o
1.5 tsp
Red Tea
100
o
1 tsp
English Breakfast
100
o
0.5 tsp
Sencha
85
o
1 tsp
Green Tea
85
o
1 tsp
White Tea
85
o
1.5 tsp
TEA TEMPERATURE CHART
Number
Of LEDs
Strength
Brew
Time
1
Weak
2 min
2
Weak
3 min
3
Medium
4 min
4
Medium
5 min
5
Strong
6 min
43970 rev1 8 _43910 08/11/2010 12:17 Page 5