Features
A
⁄
Lid
¤
Lid knob
‹
Spout filter
›
Concealed element
fi
360°connector
fl
Cordless base unit
‡
Cord storage
·
On/off switch
‚
Power on neon
„
Water level indicator
‰
Concealed element (inside)
Â
Whistle on/off switch
Using
Filling the kettle
1
Wherever possible fill through the
spout, as this helps to free the filter
from limescale build-up.
•
The integrated water level indicator
allows you to easily see the amount
of water in the kettle.
•
Always ensure that the level of
water in the kettle is filled to at least
the minimum level shown on the
water gauge. Should your kettle not
have a water gauge, always ensure
that the element is covered.
•
Boil only as much water as you
need as this saves electricity.
2
Place the kettle on the base unit,
ensuring the kettle locates on to the
360° connector.
•
The 360° connector allows the
kettle to be located at any position.
- ideal for left and right handed
users and for convenient positioning
on the worktop.
3
Plug in and switch on at the wall
socket.
4
Switch the kettle on. The ‘power on’
neon will light up.
5
When the water boils the kettle will
switch off automatically.
•
If you are using the kettle for the
first time, pour away the boiled
water and refill.
6
Lift the kettle from the base unit by
the handle ensuring you hold the
kettle level.
•
To re-boil, switch to ON again. If the
kettle has just switched off wait a
minute or so before switching it
back on again.
•
If you do not put in enough water, or
switch on the kettle when it is
empty, the safety cut-out will switch
off the power automatically. If this
happens, refill and wait a few
minutes for the element to cool,
then use as normal.
Filter removal
1
Open the lid.
2
Lift the filter upwards from its
holder.
3
To refit the filter, slide it into the side
wall guides of the filter holder until it
clicks into place.
WARNING: Unless the filter is
fitted correctly, the kettle lid
may not close and lock
securely.
Â
4
‚
⁄
¤
‹
›
fl
·
‡
fi
„
‰
B
43690-92-94MCZ-Q6:9225 47507 MEE pump - Jon 15/1/08 09:47 Page 4
