4
UK Helpline 0844 871 0954
Replacement Parts 0844 873 0720
Ireland Helpline 1800 409 119
BEFORE FIRST USE
Before using the appliance for
the first time, fill with water, boil
and pour away.
OPERATING THE
APPLIANCE
1
Wherever possible fill through
the spout, as this helps to free
the filter from limescale build-up.
•
Always ensure that the level of
water in the kettle is filled to at
least the minimum level shown
on the water level indicator.
•
Boil only as much water as you
need as this saves electricity.
2
Place the kettle on the base unit,
ensuring the kettle locates on to
the 360° connector.
•
The 360° connector allows the
kettle to be located at any
position. - ideal for left and right
handed users and for convenient
positioning on worktop.
3
Plug in and switch on at the wall
socket, if applicable.
4
Switch the kettle on. The ‘power
on’ neon, will light up.
5
When the water boils the kettle
will switch off automatically.
•
If you are using the kettle for the
first time, pour away the boiled
water and refill.
6
Lift the kettle from the base unit
by the handle ensuring you hold
the kettle level.
•
To re-boil, switch to ON again. If
the kettle has just switched off
wait a minute or so before
switching it back on again.
•
If you do not put in enough
water, or switch on the kettle
when it is empty, the safety cut-
out will switch off the power
automatically. If this happens,
refill and wait a few minutes for
the element to cool, then use as
normal.
Filter removal
1
Open the lid.
2
Lift the filter upwards from its
holder.
3
To refit the filter, slide it into the
side wall guides of the filter
holder until it clicks into place.
WARNING: Unless the filter is
fitted correctly, the kettle lid
may not close and lock
securely.
43770:x 06/11/2009 10:52 Page 6
