4
UK Helpline 0870 060 2611 Replacement Parts 0870 157 6642 Ireland Helpline 1800 409119
OPERATING THE
APPLIANCE
1
Wherever possible fill through the
spout, as this helps to free the filter
from limescale build-up.
•
If your kettle has a viewing window,
you can easily see the amount of
water in the kettle.
•
If no viewing window, open the lid to
see the water level. Do not fill above
the maximum marker inside the kettle.
•
Ensure that you put the minimum
requirement of water in the kettle, 1
cup 25cls.
•
Boil only as much water as you need
as this saves electricity.
2
Place the appliance on the base unit,
ensuring the appliance locates on to
the 360˚ connector.
•
The 360˚ connector allows the
appliance to be located at any
position. - ideal for left and right
handed users and convenient
positioning on worktop.
3
Plug in and switch on at the wall
socket.
4
Switch the appliance on.
5
When the water boils the appliance
will switch off automatically.
•
If you are using the appliance for the
first time, pour away the boiled water
and refill.
6
Lift the appliance from the base unit
by the handle ensuring you hold the
appliance level.
•
To re-boil, switch to ON again. If the
appliance has just switched off wait a
minute or so before switching it back
on again.
•
If you do not put in enough water, or
switch on the appliance when it is
empty, the safety cut-out will switch off
the power automatically. If this
happens, refill and wait a few minutes
for the element to cool, then use as
normal.
FILTER REMOVAL
1
Open the lid.
2
Lift the filter upwards from the location
using the tab provided.
3
To refit the filter, slot it into the side wall
guides and press down firmly. Ensure
the filter is correctly located into the
central guide.
WARNING: Unless the filter is
fitted correctly, the appliances lid
may not close and lock securely.
The auto switch off function may
also be affected.
43083rev2 1/3/06 11:06 Page 4
