2
3
Before using the appliance for the first time, fill
with water, boil and pour away.
1.
Wherever possible, fill through the Spout
(2)
, as
this helps to free the filter from limescale
build-up.
•
The Water Gauge
(4)
allows you to easily see the
amount of water in the kettle.
•
Boil only as much water as you need as this
saves electricity.
2.
Place the kettle on the Cordless Base
(7)
,
ensuring the kettle locates onto the 360°
Connector
(9)
.
•
The 360° connector allows the kettle to be
located at any position. - ideal for left and right
handed users and for convenient positioning on
the worktop.
3.
Plug in and switch on at the wall socket.
4.
Press the On/Off Switch
(3)
to switch the kettle
on.
5.
When the water boils the kettle will switch off
automatically.
6.
Lift the kettle from the Cordless Base by the
handle ensuring you hold the kettle level.
•
If you do not put in enough water, or switch on
the kettle when it is empty, the safety cut-out will
switch off the power automatically. If this
happens, refill and wait a few minutes for the
element to cool, then use as normal.
1.
Open the Lid
(1)
.
2.
Lift the Filter
(3)
upwards from its holder.
3.
To refit the Filter, slide it into the side wall guides
of the filter holder until it clicks into place.
WARNING: Unless the filter is fitted correctly,
the kettle lid may not close and lock securely.
•
WARNING: Always disconnect the plug from the
mains and allow the kettle to cool before
cleaning.
•
Wipe the outside with a damp cloth.
•
IMPORTANT: Do not use abrasive cleaners on
the outside of the kettle which may scratch the
surface.
IMPORTANT: As this appliance is fitted with a
concealed element it must be descaled regularly.
The frequency of descaling depends on usage
and the hardness of the water in your area.
Excessive scale can cause the appliance to
switch off before boiling and may damage the
element invalidating the warranty.
It is essential that regular descaling takes place.
We recommend descaling your kettle every two
months.
Remove hard scale using a proprietary descaling
product suitable for stainless steel, glass or
plastic.
For stainless steel kettles please follow the
instructions carefully.
IMPORTANT: Ensure that the electrical
connections are completely dry before using
the appliance.
Removing the Filter
Before first use
Using your kettle
Cleaning your kettle
Descaling
43024 rev4.qxp_Layout 1 21/01/2015 11:52 Page 5
