4
www.morphyrichards.com
B
Electrical requirements
Check that the voltage on the rating
plate of your appliance corresponds
with your house electricity supply
which must be A.C. (Alternating
current).
If the socket outlets in your home
are not suitable for the plug
supplied with this appliance the
plug should be removed and the
appropriate one fitted.
WARNING: The plug removed
from the mains lead, if severed,
must be destroyed as a plug
with a bared flexible cord is
hazardous if engaged into a live
socket outlet.
Where used, should the fuse in the
13 amp plug require changing a
13 amp BS1362 fuse must be fitted.
WARNING: This appliance must
be earthed.
A
‹
¤
⁄
›
fi
fl
‡
·
‚
„
‰
300
350
400
Components of your iron
⁄
Spray button
¤
Shot of steam button
‹
Variable steam button
›
Filling hole with cap
fi
Spray nozzle
fl
Soleplate
‡
Temperature control dial with
indicator
·
Water tank
(Illuminated on certain models)
‚
Life long anti-scale
(certain models only)
„
Temperature indicator light (red)
‰
Graduated filling beaker
Before first use
Note: The steam facility should only
be used on garments which are
suitable for ironing at the 2 and 3
dot settings.
When ironing with the steam facility
at the 2 dot setting, the steam
output should be set at the lower
end of the steam range (see variable
steam section).
Textiles and clothes are supposed
to carry ironing instructions. If they
don’t you should follow the
temperature guide on the previous
page, but be sure to test the
temperature by ironing the hem of
the garment or similar area first.
40707&40711MGR 2/3/07 09:53 Page 4
