88
UUKK HHeellpplliinnee 00884444 887711 00994466
RReeppllaacceem
meenntt PPaarrttss 00884444 887733 00771122
IIrreellaanndd HHeellpplliinnee 11880000 440099 111199
DIGITAL INTERFACE
VERSIONS
„
Set the clock
•
When the machine is plugged
in, the display will flash 12:00
dimly.
•
To set the time, press the hour
button
ˆ
and minute buttons
˜
to reach the desired time.
NOTE: The clock is a 24 hour
clock.
The clock will be reset each
time the product is unplugged
at the wall.
Making coffee
1
1
Press the push button
fi
to
open the hinged lid. The lid will
automatically rise
G
.
2
2
Using the jug, fill the water
reservoir
¤
with the required
amount of water using the level
indicator
Ê
as a guide. Both
the jug and water level indicator
are marked in cups
H
.
3
3
Spoon
‹
the required amount
of ground filter coffee into the
mesh filter
›
, spreading evenly.
We suggest one level measuring
spoon for every cup. Ensure the
filter is sitting properly in the
filter holder
I
.
4
4
Close the lid. Ensure the lid is
closed and latched properly
J
,
otherwise the machine will not
function correctly.
5
5
Slide the jug
‡/·
into the
coffee maker, ensuring it sits
correctly on the hot plate
K
.
The jug lid must be in place
during the brewing process;
otherwise the non drip valve will
not open, causing the filter to
flood.
T
Th
he
errm
ma
all C
Ca
arra
affe
e V
Va
arriia
an
ntt
Note: Thermal carafe versions
have no hot plate. Please
ensure the jug sits correctly on
the base recess.
•
Ensure the jug
·
lid is fully
closed by turning the lid
clockwise, this ensures the
maximum temperature is
maintained in the jug. To ensure
the coffee is kept as warm as
possible, we advise you rinse
your thermal carafe in hot water
before use.
•
Please note the jug lid must be
in place during the brewing
process; otherwise the non-drip
valve will not open, causing the
filter to flood.
6
6
Select the required strength of
coffee using the strength
selector on the lid
L
.
7
7
Press the power ON/OFF
selection button
Û
. The display
lights up brightly and the cup
selection indicator will flash
showing the previous selection.
NOTE: If the machine has been
unplugged from the wall socket
since the last operation, the
previous selection will be
cleared, the default setting will
be applied (1 full carafe).
8
8
Press the cup selection button
¯
to select one of the available
options,
1/2
carafe or full carafe
M
depending on the number of
cups required. Refer to ‘Cup
selection function’ on page 11
for further information. The
selection indicator will stop
flashing, if no buttons are
pressed for 2 seconds, the
machine will begin the brewing
process.
9
9
The brewing indicator
˘
will
start to illuminate from left to
right, indicating that brewing is
in progress, hot water will start
to flow through the coffee
grounds and into the jug as
coffee
·
.
L
G
I
J
H
K
M
35
47060 rev3 28/5/08 15:21 Page 8
