10
4. Usage
4.2 Settings
4.2.1 Switching Reference Numbers
2
REF.1
USER A
REF.1
REF.2
REF.3
Reference No. 1
Reference No. 2
Reference No. 3
• Do not fail to check the Flash Bar
setting whenever you change
reference numbers.
This changes the reference numbers and sets the position of the Flash Bar and the beep alarm sound volume.
4.2.2 Flash Bar Position
In this setting, you can set the position in the root canal as a reference point to determine the working length.
2
REF.1
USER A
Specify the position of the Flash Bar using “+” or “
−
.”
The position can be set within a range from “Apex” to “2.”
The 0.5 reading on the meter indicates the area near the
physiological apical foramen.
4.2.3 Selecting the Beep Alarm Sound Volume
2
REF.1
USER A
OFF
Beep alarm sound OFF
Beep alarm sound volume 1 (small)
Beep alarm sound volume 2 (large)
In this setting, you can set the volume of the alarm that sounds when the
fi
le tip reaches or advances beyond a self-set position
in the root canal (the Flash Bar position).
The 0.5 reading