MANUAL OPERATION B-91
14-9
C-axis Zero Return Operation in MDI Mode
The procedure for returning the C-axis to the zero point using MDI operation is described here.
1)
Place the DOOR INTERLOCK key-switch in the
NORMAL
position.
2)
Close the front door.
3)
Place the PANEL key-switch in one of the positions
indicated below.
(ON)
(PANEL/EDIT)
4)
Select the spindle (spindle 1 side or spindle 2 side)
to be operated by the HEAD CHANGE switch
(head 1) or
(head 2). (S type)
5)
Select the MDI mode (
) with the MODE
selection switch.
6)
Display the PROGRAM (MDI) screen.
DOOR INTERLOCK
NORMAL
RELEASE
ON
PANEL
/EDIT
OFF
PANEL
2
1
HEAD CHANGE
2
1
HEAD CHANGE
1
2
MODE
MEM
MDI
TAPE
EDIT
H
JOG
RPD
ZRN
