OPERATION PANELS A-95
7-2-3
Presently Executed Program Screen
(memory)
function selection key
(PROG)
The program which is executed presently, remaining
distance, and coordinate values (absolute or incremental)
are displayed.
The contents of display can be changed by pressing an
appropriate soft-key.
During the execution of a program, the block presently
executed is highlighted. This feature is used for checking
the contents of a program.
<Selecting the display information by pressing a soft-key>
On the PROGRAM screen (in modes other than the edit
mode), the information on the previously executed modal
G code can be displayed by pressing the
[CHANGE]
soft-
key.
7-2-4
MDI Mode Operation Screen
(MDI)
function selection key
(PROG)
This screen is used to input the MDI commands.
PROG
PROG
