A-90 OPERATION PANELS
7-2-1
Program Edit Screen
(edit)
function selection key
(PROG)
Function selection key
(PROG)
[BG EDIT]
This screen is used to edit the program. Program editing is possible only when the edit mode or
background program edit is selected.
The background program edit screen is accessible in any mode other than the edit mode.
Usually, the background program edit function is used to input/output another program or
edit a program during automatic operation in the memory mode.
<Information displayed at upper right area>
1.
During program editing in the edit mode:
Program number of the program presently being
edited
Sequence number of the program block
immediately preceding the cursor
2.
Other than program editing in the edit mode:
Program number and sequence number of the
program block edited last
3.
Right after search (program number, sequence
number) operation:
Searched program or sequence number
<Foreground edit screen>
The program is displayed in the left-half area of the
screen.
Displayed at the right-half area of the screen are
coordinate values (absolute or incremental), remaining
distance, and modal information.
During foreground editing operation, it is not
possible to display two programs.
PROG
PROG
Program number
Sequence number
NOTE
