Operators Guide
DigiBook 450
12
rel. 2.00-B
1.7.2
G
REEN
B
UTTON
F
OR
S
TART
C
YCLE
The green button accomplishes the command
to start the cycle; that means that the cover
feeder (if enabled) draws the cover and lay it
down on the nipping station, the clamp closes
and moves rightwards. The milling station (if
enabled) will make the cut, the glue will be
applied and the nipping station (if enabled)
will apply the cover on the book. The release
will automatically lay down the book on the
exit belt. All this if I have put the book in the
clamp.
1.7.3
O
PTICAL
B
ARRIERS
A
ND
S
AFETY
P
ROTECTIONS
There are two safety optical barriers at the end of the binder.
In case of occupation of the work place during the production cycle, the machine stops instantly in a
state of emergency, preventing and avoiding of shocking or crushing objects or hands or arms of the
operator
Detail: safety barrier
In the diagrams the SAFETY curtains are identified in the following way:
Left safety barrier
E21.03
, right safety barrier
E21.02
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
