1. Press POWER button to power on machine.
– Machine will be in standby mode.
– The machine will enter FUZZY mode if there is no water inside the tub.
– Press START/PAUSE button, Select PROGRAM and then HEAVY. The machine will enter FUZZY
mode and sense the laundry load automatically to set the water level.
– The machine will not be in FUZZY mode if there is water inside the inner tub.
2. Press PROGRAM to select desired program.
3. PRESS PROCESS to begin process selection.
Note: Pressing PROCESS button continuously will repeat the process cycle again.
5. Select desired water level according to laundry load.
6. On START, press DELAY button if required to select delay time, which will be displayed on the screen
indicating time to complete the wash process. To cancel DELAY, press POWER button for machine
to enter STANDBY mode.
7. To select "Air Dry" at the beginning of operation, press PROGRAM button to select AIR DRY. The
machine will be in standby mode when air dry function is completed.
8. Close the top lid, press START/PAUSE to begin operation.
9. The buzzer will sound & power will automatically cut-off after operation is completed.
Pressing PROCESS PROGRAM APPLICATION LIGHTING INDICATOR
Button No. of Times
0 Wash, Rinse & Spin Standard Program Wash, Rinse & Spin lights
are lit
1 Soak, Wash Rinse & For soiled laundry Soak, Wash, Rinse & Spin
Spin lights are lit
2 Wash Adding detergent Wash light is lit
repeatedly
3 Wash, Rinse No spinning to avoid Wash & Rinse lights are lit
creasing
4 Rinse & Spin Hand Wash, Rinse & Rinse & Spin lights are lit
Spin
5 Spin Hand Wash & Spin Spin light is lit
CONTROL PANEL & FEATURES
OPERATING INSTRUCTIONS
15
14
DELAY BUTTON
• After pressing START, press DELAY button to select preset time from 2 – 24 hours.
• Press POWER button to cancel preset timer & enter default state.
WATER LEVEL BUTTON
• On START with FUZZY LOGIC and WATER LEVEL is not selected, the digital timer will display “- -“.
• Before pressing START/PAUSE, select desired program.
– FUZZY LOGIC will only activate if NORMAL or HEAVY wash is selected.
– FUZZY LOGIC will not activate if STANDARD wash is selected with water level at “6”.
– FUZZY LOGIC will also not activate if QUICK WASH is selected with water level at “2”.
• FUZZY LOGIC will not activate if WASH process is NOT selected
• On START without FUZZY LOGIC, select desired water level according to laundry load.
– Low water level = 1-2
– Mid water level = 3-6
– High water level = 7-10
• To add more water during wash function (including rinse):
– Press WATER LEVEL button to add water. Release WATER LEVEL button to stop.
– Pause operation & press WATER LEVEL button to select higher water level.
– Press Start/Pause button to add water automatically and continue operation.
– If selected water level is lower than existing water level, the same water level will automatically
apply for the next cycle.
• Water will be added automatically during SOAK, WASH & RINSE cycles if it senses water level lower
than selected water level.
DISPLAY SCREEN
• Under delay & before wash, display shows DELAY time in HOURS.
• During wash, display will show process time in MINUTES.
• In the event of a malfunction, display will show trouble code.
• On START with FUZZY LOGIC activated, display will show “- -“.
