7
TROUBLESHOOTING
CARE & CLEANING
PROBLEM POSSiBLE CAUSES SOLUTiONS
Motor not working • Ensure power plug is connected • Connect power plug into the power
securely to the power supply. supply again.
• Ensure there is power. • Ensure power supply is in good working
order.
• Ensure power switch is turned on. • Power on.
Low suction power • Inspect whether air inlet is obstructed • Remove obstruction.
with dirt.
• Check if the dust box is full. • Empty the dust box.
• Check if the filter is obstructed. • Clean the filter.
Please perform these troubleshooting before sending the appliance to the service center.
SERVICING OF DOUBLE-INSULATEDAPPLIANCES
A double-insulated appliance is marked with one or more of the following: The words “DOUBLE
INSULATION” or “DOUBLE INSULATED” or the double insulation symbol.
In a double-insulated appliance, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated appliance, nor should
a means for grounding be added to the appliance. Servicing a double-insulated
appliance required extreme care and knowledge of the system, and should be done only
by qualified service personnel. Replacement parts for a double-insulated appliance must
be identical to the parts they replace.
POLARIZATION INSTRUCTIONS
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
order). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not
modify the power plug in any way.
l
The main unit and tube can be washed with a soft cloth with water.
The dust box and floor nozzle can be washed with running water.
Note: Do not use alcohol or gasoline.
l
Filter: Not intended for wash-machine. Remove dirt and dust from the
filter if dirty or when suction power is reduced. Wash with water and
allow to dry thoroughly.
l
Note: Assemble the filter and cyclone separator back into the dust
cup after emptying contents.
l
Any other servicing should be performed by an authorized service
representative.
6
OPERATING INSTRUCTIONS
AS A COMPACT VACUUM CLEANER
1. Press the connection tube button to detach it from the main body.
(Figure
1)
.
2. Install the adapter
(Figure 2)
.
3. Insert the crevice nozzle into the adapter and secure it
(Figure 3)
.
4. Insert the power plug into the power supply and push the button switch in
the direction of the arrow to begin operation
(Figure 4)
.
5. Push the button switch back to stop the appliance
(Figure 5)
.
6. Press the dust cup button
(Figure 6)
to detach the dust cup component.
7. Detach the strainer
(Figure 7)
from the dust cup and discard contents.
8. Detach the HEPA filter and discard contents
(Figure 8)
.
(figure 1)
(figure 2)
(figure 3)
(figure 4)
(figure 5)
(figure 7)
(figure 8)
(figure 6)