5
4
PARTS IDENTIFICATION
OPERATING INSTRUCTIONS
1
2
13
14
4
8
12
9
11
7
6
5
3
10
OPERATING AS AN UPRIGHT VACUUM CLEANER
1. Ensure there is a filter inside the dust box.
2. Ensure all parts are correctly connected and power is turned off before operating this appliance.
3. Installing the hand grip into the main body
(refer to Fig.1)
:
– Apply a little force to ensure it locks into the interlocking tube.
– WARNING: Don’t overexert force when installing into the main body to prevent damaging the
lock.
5. To detach the hand grip, push and open the separation button and detach the hand grip
(see Fig. 3)
.
6. Connect power plug into power supply.
7. Turn on power supply.
8. Move suction brush along surface to be cleaned such as table, corners and clothing.
9. Always detach the power cord from the power supply after every use.
4. Connect power plug into power supply.
5. Turn on power supply.
NOTE:
Do not entwine the power cord over your feet or other heavy objects.
6. Move the floor nozzle up and down to clean the floor.
IMPORTANT:
Keep appliance on a level surface.
7. Avoid pressing the floor nozzle on the floor or move it breadthwise to prevent damaging the floor.
8. Always detach the power cord from the power supply after every use.
OPERATING AS A COMPACT VACUUM CLEANER
1. Detach the hand grip and floor nozzle.
2. Attach the suction brush
(refer to Fig.2)
.
3. Ensure there is a filter inside the dust box.
4. Ensure all parts are correctly connected and power is turned off before operating this appliance.
1. Hand grip
2. Power cord hook
3. Separation button
4. Power cord
5. Power switch
6. Main body
7. Dust box release button
8. Filter
9. Dust box
10. Suction brush
11. Floor brush
12. Cyclone separator
13. Nozzle
14. Brush clip
SPECIFICATIONS
MODEL MVC-CYCLONE 60
RATED VOLTAGE / FREQUENCY 220-240V~ 50/60Hz
RATED POWER 600W
MAX. SUCTION 16Kpa
DUST BOX CAPACITY 1.2L
Insert the Handgrip
P
Don’t touch the sepration Button
(figure 1)
Pull out the Handgrip
Push and open the
SeparationButton
(figure 3)
(figure 2)
