7
TROUBLESHOOTING
CARE & CLEANING
PROBLEM POSSiBLE CAUSES SOLUTiONS
Low suction power or abnormal • Motor is overheating • Stop operation
noise
Brush or filter block • Check if air inlet is obstructed by dust. • Empty the dust box.
• Check if dust box is full. • Clean the filter.
• Check if the filter is blocked.
Appliance not working • Ensure battery still has power • Charge the battery
• Clean the filter & restart the machine
Please perform these troubleshooting before sending the appliance to the service center.
SERVICING OF DOUBLE-INSULATEDAPPLIANCES
A double-insulated appliance is marked with one or more of the following: The words “DOUBLE
INSULATION” or “DOUBLE INSULATED” or the double insulation symbol.
In a double-insulated appliance, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated appliance, nor should
a means for grounding be added to the appliance. Servicing a double-insulated
appliance required extreme care and knowledge of the system, and should be done only
by qualified service personnel. Replacement parts for a double-insulated appliance must
be identical to the parts they replace.
POLARIZATION INSTRUCTIONS
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
order). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not
modify the power plug in any way.
l
The main unit and tube can be washed with a soft cloth with water. The dust box and floor nozzle
can be washed with running water.
Note: Do not use alcohol or gasoline.
l
Filter: Not intended for wash-machine. Remove dirt and dust from the filter if dirty or when suction
power is reduced. Wash with water and allow to dry thoroughly.
l
Note
: Assemble the filter and cyclone separator back into the dust cup after emptying contents
l
Any other servicing should be performed by an authorized service representative.
6
OPERATING INSTRUCTIONS
AS A COMPACT VACUUM CLEANER
1. Disassemble the tube from the suction inlet of the dust
cup
(Figure 1)
.
2. Insert the crevice nozzle into the suction inlet of the
dust cup
(Figure 2)
.
3. Turn on the switch in the direction of the arrow to
begin operation
(Figure 3)
.
4. Push the button switch back
(Figure 4)
to stop
operation.
5. Press the dust cup release button to remove the dust
cup
(Figure 5)
.
6. Remove the filter from the dust cup for cleaning
(Figure 6)
.
7. Remove the separator from the dust cup and discard
contents
(Figure 7)
.
INDICATOR LIGHT NOTIFICATIONS
1. Normal operation: The blue indicator light stays on.
2. Turn off the power: the blue light is off.
3. Low battery: the blue indicator light flashes.
4. Fully charged: The blue indicator light stays on.
5. When charging continuously: the blue indicator light flashes.
(figure 1)
(figure 2)
(figure 3)
(figure 4)
(figure 6)
(figure 7)
(figure 5)
