7
6
CARE & MAINTENANCE
It is recommended to clean your vacuum cleaner periodically to prevent the motor from damage.
1. Push the upper function button to remove the dust box.
(Refer to Fig.4)
2. Detach the filter handle
(Refer to Fig.5)
3. Empty the dust box.
4. Remove dust on the filter.
MAINTENANCE
1. Clean the main unit and handgrip using a soft cloth with water.
2. The dust box and floor brush can be washed with water.
CAUTION: DO NOT use abrasive cleansing agents, alcohol or gasoline.
3. DO NOT machine-wash the filter. If it is very dirty or suction power reduces, remove the dust on the
filter and wash it with water and allow to dry thoroughly.
TROUBLESHOOTING
5HPRYH
3UHVV
Remove dust box
(figure 4)
+DQGOH
RIILOWHU
Remove filter
(figure 5)
PROBLEM POSSIBLE CAUSES SOLUTIONS
Motor not operating • Ensure power plug connected to the • Insert the power plug into the power
power supply. supply again securely.
• Ensure there is power supply. • Ensure there is proper power supply.
• Check if the power switch is turned on. • Ensure that the power switch is
turned on.
Suction power has reduced • Check whether air inlet is blocked by • Remove dirt and grime.
considerably dirt and grime.
• Check whether the dust box is full. • Empty the dust box.
• Check if the filter is blocked. • Clean the filter.
Please troubleshoot using the following guides before sending your appliance to the service
centre:
MVC-25DEX(IM)190318.qxp_Layout 1 4/6/18 10:59 AM Page 4
