5
4
PARTS IDENTIFICATION
OPERATING INSTRUCTIONS
Dustproof Cover
Bread Slot
Browning Control
Selector
Cancel Button
Reheat Button
Defrost Button
Removable
Crumb Tray
Carriage
Handle
1. Insert bread slice into the bread slot which can be inserted two slices at most every time. Only the
regular slice can be placed into the bread slot.
NOTE:
Ensure the removable crumb tray is correctly positioned before using.
2. Insert power plug into the power supply.
3. Select desired browning with the Browning Control Selector with its 7 levels of shade.
NOTE:
• To toast a single slice of bread, set the heat selector to a lighter setting than you normally would. The
toaster is designed to heat the whole toasting chamber for two slices.
• By lowering the heat for a single slice, you won't over toast.
4. Press carriage handle down vertically until it is positioned in place. The CANCEL indicator will
illuminate, and toasting will begin.
5. Once the bread has been toasted to the desired shade, the carriage handle will be automatically
spring up, indicating bread toasting has completed and can be removed.
NOTE:
The carriage handle can only be latched when appliance is connected to the power supply.
6. Toasting shade can be observed during the toasting process and can be interrupted by pressing the
Cancel button at any time.
7. For refrigerated bread – set Browning Control Selector to desired shade. Press carriage handle down
vertically until it is positioned in place, then press DEFROST button. The DEFROST indicator will
illuminate.
8. To reheat cold toasted bread - press carriage handle down vertically until it is positioned in place, then
press REHEAT button. The REHEAT indicator will illuminate using a pre-set duration.
CAUTION
• Remove all protective wrappings prior to operation and toasting.
• If toaster emits smoke during operation, press CANCEL to stop toasting immediately.
• Avoid toasting food with extremely runny ingredients such as butter.
• Never attempt to remove bread stuck in the slots without first unplugging the toaster from the power
supply. Ensure not to damage the internal mechanism or heating elements when removing
stuck bread.
• The bread slot is only applicable for toasting regular bread slices.
• To achieve uniform shades, it is recommended to wait minimum 30 seconds between each toasting
interval so shade control can reset automatically.
DUSTPROOF COVER
When not use, place the dustproof cover on top of the toaster to prevent dust or insects/objects from
entering into the bread slots.
BROWNING CONTROL SETTING SHADE

1 – 2 Light
3 – 5 Medium
6 – 7
Dark
• Unwind the power cord. Ensure that the removable crumb tray is in place and that there is nothing in
the toaster slot(s).
• Insert power plug into the power supply.
• The toaster will release an odour during first time use, caused by manufacturing residue or oil
remnants in the toaster or heat element. It is normal and will gradually disappear after consecutive
use.
• For first time operation, it is recommended to operate the appliance according to the steps below,
except without bread.
• Allow the toaster cool down and begin toasting the first slice of bread.
SPECIFICATIONS
USING FOR THE FIRST TIME
MODEL MTS-22A
RATED VOLTAGE / FREQUENCY 220-240V~ 50/60Hz
RATED POWER 750W
TYPE 2 SLICE