4
INSTRUCTIONS FOR USE
1. ON/OFF SWITCH
•
Connect power supply. The buzzer will sound, indicating that the induction cooker is
on standby mode and the fan will begin operation. The display show “- - - -”, If there
is no operation, induction cooker will automatically switch off.
* Start up functions: press the On/Off button or any function key, the buzzer sound if
there is no pot on the heating plate. If there is still no pot on the heating plate, the
buzzer will sound for 30 seconds and the fan will work for one more minute then
automatically switch off. If a pot is placed on the heating plate, the unit will resume
start up operation.
2. STEAM
•
When power is on, select the “Steam” function and the respective indicator light will
illuminate.
3. PORRIDGE
•
When power on, select the “Porridge” function, the respective indicator light will
illuminate.
•
When the congee is finished, the screen will display “End”. It will automatically
switch to “Keep Warm” mode for 2 hours with the respective indicator light
illuminated.
4. SOUP
•
When power on, select the “Soup” function and the respective indicator light will
illuminate
•
When soup is finished, the screen will display “End”. It will automatically switch to
“Keep Warm” mode for 2 hours with the respective indicator light illuminated.
5. STIR FRY
•
When power on, select the “Stir Fry” function, the respective indicator light will
illuminate.
•
Adjust the temperature accordingly.
6. BARBECUE
•
When power on, select the “Barbecue” function, the respective indicator light will
illuminate.
•
Adjust the temperature accordingly.
5
7. STEAM BOAT
•
When power is on, the cooker will enter the steam boat mode and the “Steam Boat/
Power” light will illuminate.
•
Adjust the power
•
Press the “Timer”, set the time for power off. The screen will display the remaining
time before power off. If required, you may revise the set time for power off.
8. ELECTRICITY VOLTAGE
•
When the induction cooker is working, press “Electricity Voltage”, the display show
the electricity voltage from start up till now, Press “electricity voltage” again to
display current voltage for about 10 seconds before reverting to normal operation
mode.
9. PAUSE
•
When the induction cooker is on “Stir Fry” or “Steam Boat” modes, pressing the
“Pause” key will halt the operation. The display will show “STOP”. Press “Pause”
again to resume operation.
TROUBLE SHOOTING
PROBLEM POSSIBLE
REASONS
SOLUTIONS
E1
The induction cooker is left on
The unit will automatically shut down
without a pan or with an
and will only operate again when the
incompatible pan.
right or compatible pot is in used.
E2
Induction heat emitter has
The unit will operate again once the
overheated (>105ºC)
PCB board has cooled down and back
to room temperature.
E3
Supply voltage exceeded 270V
The unit will operate again when supply
voltage is back to normal.
E4
Supply voltage is lower than
The unit will operate again when supply
145V
voltage is back to normal.
E5
Thermal sensor has overheated. Switch off the unit and let the unit to
cool down until the thermal sensor is
back to room temperature.
E6
The inner pot has overheated
Switch off the unit and let the unit to
cool down before operating again.
(Note: BBQ & Stir fly function is without this feature.)
E0
Inner Circuit Malfunction
Switch off the unit and send back to
nearest authorized service agent.
MIC-BB20EC#4.11.09 11/4/09 11:48 AM Page 3
