5
cautiOn
4
IMPORTANT
• Before installation and usage read all instructions carefully and ensure that the voltage (V) and the frequency (Hz)
indicated on the rating plate are exactly the same as the voltage and frequency in your home. Please refer to the
rating plate that can be found behind the grease filter.
•
All installation work must ONLY be carried out by a qualified electrician or similarly competent person.
INSTALLING YOUR DESIGNER HOOD
1. Main Set Installation:
The minimum distance between the cooker and the appliance is 75-90cm. Drill holes on the wall and secure the
screws to the main unit. Adjust the main unit until it is aligned horizontally.
2. Fitting the chimney
• Install the chimney bracket according to your kitchen cabinet design. Find a suitable location and install it on the
wall. (fig 1)
• Adjust chimney height according to your kitchen cabinet design. Insert the aluminium tube into the indentation.
(fig 2 )
• Screw the upper chimney and bracket. (fig 3)
installatiOn
SURROUNDING ENVIRONMENT
The designer hood must be installed in accordance with the installation
instructions and all measurements followed. The designer hood should
be installed near an outdoor window so that the exhaust fumes from
the tube can exit easily through the window.
Alternatively, make a hole on the wall to allow the exhaust fumes exit
from the aluminium tube. Do not force the aluminium tube into the hole.
Similarly, do not select a place that has too many windows to prevent
excess ventilation that may affect the designer hood performance. (fig 1)
cautiOn
WARNING: UNPLUG THE POWER SOCKET BEFORE UNINSTALLATION.
1. Please keep a minimum 75 – 90cm
distance between designer hood and
cooker. Different types of cooker may
require bigger space allowance. (fig 2)
2. Do not cook with an open flame under
the designer hood. (fig 3)
Operating instructiOns
Light
Low Speed
Medium
Speed
High Speed
FAN SPEED SETTING
• The designer hood is operates at 3 fan speed settings. Touch the high speed button to turn on high speed ventilation,
medium speed button to turn on low speed ventilation, and low speed button to turn on low speed ventilation. The
previously used fan speed will be automatically memorized and the designer hood will adjust itself to the previously
used fan speed in the next operation.
LIGHT
• The user can turn on the designer hood illumination by touching the 'Light' button. Touch once to turn it on and once
more to turn it off . The light function is independent from other function which will not be affected by other functions
or adjustment.
75-90cm
75-90cm
Keep it horizontal
(Level)
fig 1
fig 2
fig 3
75-90cm
75-90cm
fig 1
75-90cm
75-90cm
fig 2
75-90cm
75-90cm
fig 3
3. Adjust the chimney height to ensure the exhaust fumes has exited completely.
4. Ensure adequate ventilation of the room when the designer hood is used at the same time as using cooking
appliances that depend on gas or other fuels.
5. Accessible parts may become hot when used with cooking appliances.
6. The fumes must not be discharged into a flue that is used for exhausting fumes from other appliances burning gas
or other fuels.
7. Securely tighten the screws after fixing the designer hood.
8. Do not tamper with or attempt to modify the appliance in any way to prevent accidents/hazards.
9. CAUTION: The edges of the designer hood are sharp – be mindful of this as you handle your appliance, especially
during installation and cleaning.
10. Ensure the ducting for the extractor mode has the same diameter as the outlet hole throughout.
MDH-912ST(IM)100412_Layout 1 4/17/12 5:21 PM Page 3
